Series of hot water is solid to turn to immerse the main technical parameters and performance indicators       

Hot water is solid to turn to immerse agents conferences       

• Appearance: colorless transparent liquid        

• Viscosity (7-9 MPA. s )         

• Surface tension 37x10¯³       

• Working temperature -55 degrees ~200 degrees Celsius       

◇ Immerse the rate near 99.9%

◇90 ℃ hot water curing time of 8-10 minutes        

◇ Cured hardness (SHA)65-75

◇ Suitable cast void diameter 0-100um (based on castings quality is slightly different)       

◇ Characteristics of high permeability, cleaning good, curing high strength and high durability (petrol, ATF, resistance to LLC, high engine oil)       

• Useful life greater than or equal to 1 year

Cleaning wastewater infiltration testing are as follows